Discover the unrivaled elegance of our VELETA aluminum swing gate adorned with its decorative plates with “Nature” style motifs
Its timeless anthracite gray color will harmonize with all architectural styles, from contemporary to traditional.
Decorative plaques with the “Nature” motif add an organic and original touch, transforming your entrance into a true work of art when natural light decides to shine through.
Made of aluminum, this gate combines lightness and robustness, resistant to bad weather while minimizing maintenance.
Opt for the perfect combination of functionality and aesthetics with our VELETA aluminum swing gate.
Description: Semi-openwork straight swing gate, two equal leaves Material: Aluminum Color: Anthracite gray RAL 7016 Pattern Type: “Nature” Dimensions: Width 300 cm x Height 126 cm Width required between pillars: 305cm Minimum height of pillars: 140 cm Inspired and designed in France
This gate kit to assemble and install by yourself contains: - 12 aluminum blades (Height 16 cm) - 2 reinforced aluminum blades for motorization (Height 16 cm) - 2 decorative aluminum plates with “Nature” pattern (thickness 20/100) - 2 upper hinges mounted on ball bearings - 2 lower hinges - 1 automatic central stop - 2 receiving stops - 1 barrel lock - 1 handle (Black color) - 5 keys - Finishing covers - Screws
The posts are not included in our kits because they are not essential for the installation of your swing gate if your exterior already has pillars/posts. The minimum height of the pillars for this gate is 140 cm.
The VELETA model is also available in other dimensions. Also available in a gate version.
To further adapt your swing gate to your project, all our swing gates can be cut in width (for an asymmetrical design for example or a narrower entrance).
And for even more personalization, you can change the direction or position of the decorative plates.
Gate delivered as a kit. Clear instructions, quick and easy assembly. Find all the necessary information about this product in the technical characteristics.
The EIFEL posts in thermo-lacquered aluminum have been specially designed for the installation of a swinging or sliding gate or even a gate.
Practical, the finishing cap of our EIFEL posts can be easily installed and removed to allow you to pass electrical wires in the event of motorization of your gate, gate or for the installation of motorization accessories (flash light, photocells, ...)
This 20x20cm EIFEL post with a height of 166cm is suitable for all aluminum gates and gates not exceeding 140cm in height.
Colours: Anthracite gray (RAL 7016) Material: Aluminum Post height: 1.66 m Pole section: 20 x 20 cm Section of the patina: 25 x 25 cm Installation method: To screw or seal Maximum height of the gate to be installed: 140cm
Accessories included: - Plastic finishing cap with fixing screws (Anthracite grey) - Expansion bolts (for floor fixing)
Advice :
Weight of the gate less than 80kg: You can fix your post by screwing the post fixing plate to the ground (bolts included in our kits) *
Weight of the gate greater than 80 kg: It is recommended to concrete and steel the EIFEL post in order to consolidate it (see technical diagram).
* In the case of hollow posts, we advise you to fix the plate using 10x120mm anchoring studs, for a stronger and more secure fixing. In the case of concrete posts, you can completely fix your post using the bolts included in our kits
Compatible with all CASANOOV gates and gates 140 cm high The EIFEL 20x20cm post is available in a height of 190cm. Also available in section: 10x10cm; 15x15cm
If your installation requires several posts, you will find in the "Gate Accessories" category promotional offers in the form of a set of 2 or 4 EIFEL posts of your choice.
Clear instructions, simple and quick assembly. Find all the necessary information about this product in the technical characteristics.
Technical drawings
Swing gate 3m VELETA H.120 grey aluminium
Swing gate 3m VELETA H.120 grey aluminium
Aluminium Post 20x20 EIFEL H.166cm - Anthracite Grey
Assembly instructions - KIT-000485
