This openwork sliding gate combines protection and design. Width 586 cm. Width between pillar: 562 cm. Height 163cm. Anthracite gray color. RAL7016.
Accessories: Cylinder lock. 2 keys. End stop. Upper guide with 6 nylon rollers. Reception stop. 6 casters. Aluminum rail 11.3 m. Screws. Posts not included. Height of the pillars minimum 175 cm.
Supplied as a kit. Clear instructions, quick and easy assembly. You can automate the gate with a sliding gate motor. Find all the characteristics in the technical sheet.
The TANKER C600 sliding gate motor is designed for users wishing to motorize their sliding gate to automate its opening and closing. It allows you to transform your gate into an electric sliding gate. This rack-and-pinion motor is suitable for all types of sliding gates that can be motorized. Whether for PVC, wood, aluminum, or iron sliding gates, this automatic system can be installed on all models weighing less than 600 kg.
Here are the main technical specifications of the motor:
Motor voltage: 230V – 370W Input power: 220VAC±10%/110VAC±10% Frequency: 50Hz/60Hz Gear module: M4 Z=16 teeth Output torque: 30.0 Nm Nominal rotation speed: 14,000 rpm Maximum gate weight: 600kg on level ground Magnetic start and end stops Environmental temperature: -25°C ~ +55°C Protection class: IP55 Opening speed: approximately 12 meters per minute Maximum force: 1100N Nylon rack Control card included with the motor.
Accessories included:
- Two 4-button remote controls with protective cover. Batteries are included. - Nylon rack (4m – 12 pieces of 33cm) - Installation and setup manual - 2 quick release keys in case of power outage 1 pair of infrared photocells with the following characteristics: - 'Transmitter' photocell - 'Receiver' photocell - Black ABS material - Infrared with anti-glare 50,000LUX 1 flashing LED light with a power of 3W (equivalent to a power of 30W for an old-generation incandescent bulb) with the following characteristics: - Operating voltage: 12-265 VAC/DC - Load capacity: < 3W - Flashing frequency: 1Hz - Operating temperature: -20°C ~ +60°C - IP rating: IP54
Tanker C600 motorization features : - Opening according to your choice: left to right (factory mode) or right to left. - Automatic closing: After opening, the gate will automatically close after 0, 10, 30, or 60 seconds, depending on your choice. - Pedestrian mode: The gate opens only partially and then closes after 0, 5, 10, or 30 seconds. - Condominium mode: This mode allows you to reduce settings and configure up to 50 remote controls. Each remote control will control: button 1 (gate opening), button 2 (gate stopping), button 3 (gate closing), and button 4 (pedestrian mode). Each remote control will operate in the same way. - Adjustable opening and closing sensitivity: Depending on your environment, you can adjust the opening and closing power. - Manual gate unlocking. With the included key, you can disengage the opening of your gate and operate it manually. - Auto-stop. The gate stops if it encounters an obstacle. - The motor cannot be connected to a backup battery. In the event of a power outage, manual unlocking with two keys (included) is possible. This disengages the motor's output pinion and allows you to operate your gate freely.
You can pair this motor with photocells, a flashing light, and an opening push button. Be sure to check the electrical compatibility (voltage in Volts) of your existing accessories if they are not from our website. All our accessories are compatible with all our motors.
Installation Tips:
To successfully connect and configure your motor, proceed step by step and check that it is working properly between each step. If you pair accessories with your C600 motor, check each time that your motor is in working order. Finally, ensure that your electrical connection is properly wired. This will help you operate your installation and prevent electrical leaks. Our Casanoov technical team is here to assist you if needed.
Electric sliding gate 6m VOGEL 600C160 + TANKER C600 motorization
Secure payment
Welcome to Casanoov! Specializing in the online sale of equipment dedicated to the home environment, Casanoov makes it a point of honor to offer you a complete offer to delimit your exterior according to the latest market trends at affordable prices. Ultra competitive prices. Quality at the right price! This is Casanoov's motto. Discover our wide range of aluminum swing gates, sliding gates, gates and fences, the latest trend in terms of material. All our products have been thought out and designed in kit form. Easy and quick to install, assembling your Casanoov gates and fences yourself will be child's play. All our models have been designed to combine both safety and aesthetics. Casanoov offers you offers the choice to meet all your desires and requirements: classic models with full filling, semi-perforated, perforated or ultra perforated (barred) or more modern with our design models. At Casanoov, everything is done to satisfy you! Our design models are inspired and designed in France, they are available in 6 variations and each has unique decorative plates, designed by us for you. Choose the range that best suits you for a modern exterior that suits you. And for an even more modern exterior, think about automating your entrance and browse our category of motorization which offers you automations for swing and sliding gates adapted to your needs. Also discover all our accessories for a harmonious exterior, such as our aluminum posts in colors matching our gates, gates and garden fences. To make your choice easier, you have all the technical information as well as visuals in situation on all of our product sheets. Payments are secure and delivery is free. Enjoy and happy shopping!
Assembly instructions - KIT-000158
