Need a sturdy and elegant sliding gate to guarantee complete privacy? Discover our EIGER range.
Discover the EIGER solid sliding gate, specially designed to offer maximum protection thanks to its solid and elegant design. The horizontal slats create a sturdy barrier while maintaining a modern and sleek aesthetic. Perfect for ensuring complete privacy, this sliding aluminum gate combines strength and elegance, providing enhanced security to your outdoor space while enhancing its contemporary style.
Sliding Gate: The Ideal Solution for Small Spaces and Sloping Land
A sliding gate is the perfect choice for optimizing the space in your driveway, especially if it is limited. Thanks to its side opening, it is perfectly suited to situations where a swing gate would be restrictive. It facilitates vehicle passage without requiring any backing up, and can be installed on a sloping driveway. If you want even more convenience, a sliding gate motor allows you to automate its opening, for simpler and more fluid daily use.
This sliding gate has a wind resistance of 50 km/h.
Material: Aluminum Color: Anthracite Gray - RAL 7016 Dimensions: Width 298 cm x Height 147 cm Total width required with clearance: 648 cm Minimum pillar height: 160 cm Inspired and designed in France
Aluminum withstands temperature changes very well, whether hot or cold. It doesn't warp and remains in excellent condition, even after years of use. This robust material is made to last while maintaining its beautiful appearance. With aluminum, you're choosing a reliable solution suitable for all conditions, quite simply.
Are posts included?
Our kits do not include posts, as they are not always necessary. If you already have posts in place, installation is possible without adding any additional materials.
For those who need them, we offer value packs with compatible posts. To ensure a safe and stable installation of the sliding gate, the posts must be at least 160 cm high and at least 15 cm wide.
How should you maintain your aluminum structure?
Aluminum requires little maintenance, but regular cleaning extends its lifespan. Once or twice a year, simply use warm soapy water and a soft cloth, then rinse and dry thoroughly. Avoid abrasive products and high-pressure cleaning, which could damage the lacquer.
Need help choosing your sliding gate? Contact our customer service via our online form.
The RANGER C300 sliding gate motor is designed for users wishing to motorize their sliding gate to automate its opening and closing. It allows you to transform your gate into an electric sliding gate. This rack-and-pinion motor is suitable for all types of sliding gates that can be motorized. Whether for PVC, wood, aluminum, or iron sliding gates, this automatic system can be installed on all models weighing less than 300 kg.
Here are the main technical specifications of the motor:
Motor voltage: 230V – 250W Input power: 220VAC ±10%/110VAC ±10% Frequency: 50Hz/60Hz Gear module: M4 Z=16 teeth Output torque: 30.0 Nm Nominal rotation speed: 14,000 rpm Maximum gate weight: 300 kg on level ground Magnetic start and end stops Environmental temperature: -25°C ~ +55°C Protection class: IP55 Opening speed: approximately 12 meters per minute Maximum force: 1100N Nylon rack Control card included in the motor.
This kit contains: - 1 motor - 2 4-button remote controls with protective covers. Batteries are included. - Nylon rack (4m – 12 pieces of 33cm) - Installation and setup manual - 2 quick release keys in case of power outage
The motor cannot be connected to a backup battery. In the event of a power outage, manual unlocking with two keys is possible. This disengages the motor's output pinion and allows you to operate your gate freely. The flashing light and photocells are not included.
RANGER C300 motor features:
- Opening according to your choice: left to right (factory mode) or right to left. - Automatic closing: After opening, the gate will automatically close after 0, 10, 30, or 60 seconds, depending on your choice. - Pedestrian mode: The gate opens only partially and then closes after 0, 5, 10, or 30 seconds. - Condominium mode: This mode allows you to reduce settings and configure up to 50 remote controls. Each remote control will control: button 1 (gate opening), button 2 (gate stopping), button 3 (gate closing), and button 4 (pedestrian mode). Each remote control will operate in the same way. - Adjustable opening and closing sensitivity: Depending on your environment, you can adjust the opening and closing power. - Manual gate release. Using the provided key, you can disengage the opening of your gate and operate it manually. - Auto-stop. The gate stops if it encounters an obstacle.
You can combine this motor with photocells, a flashing light, and an opening push button. Be sure to check the electrical compatibility (voltage in Volts) of your existing accessories if they are not from our website. All our accessories are compatible with all our motors.
Installation tips:
To successfully connect and configure your motor, proceed step by step and verify proper operation between each step. If you combine accessories with your C300 motor, check each time that your motor is in working order. Finally, ensure proper wiring of your electrical connection. This will help you manage your system and prevent electrical leaks. Our Casanoov technical team is here to assist you if needed.
Assembly instructions - KIT-000028
