Are you looking for a modern and sleek sliding gate to enhance your exterior? Discover our VOGEL range.
The VOGEL openwork sliding gate boasts a modern and sleek design, ideal for enhancing your exterior. Thanks to its spaced horizontal slats, it allows excellent natural light to circulate while providing protection from prying eyes. Its timeless style adapts to any environment, adding a touch of elegance to your entrance. Crafted from aluminum, the VOGEL sliding gate guarantees strength and durability, while offering an optimal security system. Choosing the VOGEL aluminum sliding gate combines aesthetics, functionality, and durability for an exterior that is both secure and harmonious.
Sliding Gate: Ideal Solution for Small Spaces and Sloping Land
A sliding gate is the perfect choice for optimizing the space in your entrance, especially if it is limited. Thanks to its side opening, it is perfectly suited to situations where a swing gate would be restrictive. It facilitates vehicle passage without requiring any backing up and can be installed on a sloping driveway. If you want even more convenience, the sliding gate motor allows you to automate its opening, for simpler and more fluid daily use.
This sliding gate has a wind resistance of 60 km/h.
Material: Aluminum Color: Anthracite Gray - RAL 7016 Dimensions: Width 498 cm x Height 145 cm Required width between pillars: 474 cm Total required width with clearance: 968 cm Minimum pillar height: 160 cm Inspired and designed in France
Aluminum is highly resistant to temperature changes, whether hot or cold. It doesn't warp and remains in excellent condition, even after years of use. This robust material is made to last while maintaining its beautiful appearance. With aluminum, you're simply choosing a reliable solution suitable for all conditions.
Need posts?
Posts are not included in our kits, as they are not necessary if you already have exterior pillars or posts for installing your product. If you need pillars, we offer promotional packs that include the product of your choice with two suitable posts. To ensure a safe and stable installation of your sliding gate, the posts must be at least 160 cm high and at least 20 cm wide.
How should I maintain my aluminum product?
Aluminum requires very little maintenance. To maintain its shine and durability, clean it once or twice a year with warm, soapy water and a soft cloth. Rinse and dry thoroughly, and avoid abrasive products or high-pressure cleaning, which could damage the powder coating.
Need help choosing your sliding gate? Contact our customer service via our online form.
The TANKER C600 sliding gate motor is designed for users wishing to motorize their sliding gate to automate its opening and closing. It allows you to transform your gate into an electric sliding gate. This rack-and-pinion motor is suitable for all types of sliding gates that can be motorized. Whether for PVC, wood, aluminum, or iron sliding gates, this automatic system can be installed on all models weighing less than 600 kg.
Here are the main technical specifications of the motor:
Motor voltage: 230V – 370W Input power: 220VAC ±10%/110VAC ±10% Frequency: 50Hz/60Hz Gear module: M4 Z=16 teeth Output torque: 30.0 Nm Nominal rotation speed: 14,000 rpm Maximum gate weight: 600kg on level ground Magnetic start and end stops Environmental temperature: -25°C ~ +55°C Protection class: IP55 Opening speed: approximately 12 meters per minute Maximum force: 1100N Nylon rack Control card included in the motor.
This kit contains: - 1 motor - 2 4-button remote controls with protective cover. Batteries are included. - Nylon rack (4m – 12 pieces of 33cm) - Installation and setup manual - 2 quick release keys in case of power outage - 1 pair of infrared photocells with the following features: - 'Transmitter' photocell - 'Receiver' photocell - Black ABS material - Infrared with anti-glare 50,000LUX - 1 3W LED flashing light (equivalent to 30W for an old-generation incandescent bulb)
The flashing light has the following specifications: - Operating voltage: 12-265 VAC/DC - Charging capacity: < 3 W - Flashing frequency: 1 Hz - Operating temperature: -20°C ~ +60°C - IP rating: IP54
Tanker C600 motor features: - Opening according to your choice: left to right (factory mode) or right to left. - Automatic closing: After opening, the gate will automatically close after 0, 10, 30, or 60 seconds, depending on your choice. - Pedestrian mode: The gate opens only partially and then closes after 0, 5, 10, or 30 seconds. - Condominium mode: This mode allows for reduced settings and the configuration of up to 50 remote controls. Each remote control will control: button 1 (gate opening), button 2 (gate stopping), button 3 (gate closing), and button 4 (pedestrian mode). Each remote control will operate in the same way. - Adjustable opening and closing sensitivity: Depending on your environment, you can adjust the opening and closing power. - Manual gate release. With the included key, you can disengage the opening of your gate and operate it manually. - Auto-stop. The gate stops if it encounters an obstacle. - The motor cannot be connected to a backup battery. In the event of a power outage, manual release with two keys (included) is possible. This disengages the motor's output pinion and allows you to operate your gate freely.
You can combine this motor with photocells, a flashing light, and an opening push button. Be sure to check the electrical compatibility (voltage in Volts) of your existing accessories if they are not from our website. All our accessories are compatible with all our motors.
Installation Tips:
To successfully connect and configure your motor, proceed step by step and check that it's working properly between each step. If you're adding accessories to your C600 motor, check that your motor is working properly each time. Finally, make sure your electrical wiring is clean. This will help you with your installation and prevent electrical leaks. Our Casanoov technical team is here to assist you if needed.
The GEAR 4-meter nylon rack is specially designed for motorized sliding gates. It consists of 12 segments, each 33 cm long, with integrated mounting eyelets for quick and easy installation.
This kit contains: - 12 segments of 33 cm each
The assembly forms a solid and durable 4 m rail, perfectly suited to gate motorization systems.
Assembly instructions - KIT-000474
