- Aluminium gate post (Anthracite grey)
- Height: 190cm & Section: 10x10cm
- Finishing cap & base included
- To be screwed or embedded
The EIFEL powder-coated aluminum posts have been specially designed for the installation of a swing gate or even a gate.
Practical, the finishing cap of our EIFEL posts is easily installed and removed to allow you to pass electrical wires in the event of motorization of your gate, wicket or for the installation of motorization accessories (flash light, photocells, etc.). ...)
This 10x10cm EIFEL post with a height of 190cm is suitable for all aluminum swing gates and wickets not exceeding 180cm in height.
Color: Anthracite gray (RAL 7016)
Material: Aluminum
Post height: 1.90 m
Post section: 10 x 10 cm
Section of the patina: 15 x 15 cm
Installation method: Screw or seal
Maximum height of the gate to install: 180cm
Accessories included:
- Plastic finishing cap with fixing screws (charcoal gray color)
- Expansive bolts (for floor fixing)
Advice :
Gate weight less than 80kg: You can fix your post by screwing the post fixing plate to the ground (bolts included in our kits) *
Gate weight greater than 80kg: It is recommended to concrete and reinforce the EIFEL post in order to consolidate it (see technical diagram).
* In the case of hollow posts, we advise you to fix the plate using 10x120mm anchor dowels, for a stronger and more secure fixing.
In the case of concrete posts, you can easily fix your post using the bolts included in our kits
Compatible with all CASANOOV gates and wickets height 160 and 180 cm
The EIFEL 10x10cm post is available in a height of 166cm.
Also available in section: 15x15cm; 20x20cm
If your installation requires several posts, you will find promotional offers in the “Gate Accessory” category in the form of a set of 2 or 4 EIFEL posts of your choice.
Clear instructions, quick and easy assembly.
Find all the necessary information about this product in the technical characteristics.
Download the assembly instructions (PDF)
