The NEVIS Driveway swing gate, with its simple and classic design is the perfect compromise between openwork and fully boarded swing gate. This horizontal mixed infill model will allow you to reconcile luminosity and privacy by means of a barred opening in the upper part and a shading in the lower part.
Description : Double swing gate with mixed infill, Vertical Board with Straight Top & horizontal Open Pales Material : Aluminium Colour : Anthracite grey (RAL 7016) Dimensions : Width 304cm x Height 161cm Required width between pillars: 309cm Minimum height of pillars : 175cm Inspired and designed in France
This Swing Gate with mixed infill kit, to be assembled and installed by yourself, contains : - 4 aluminium bars (Width 7.8cm) - 18 powder-coated aluminium slats (Width 15.5cm) - 2 upper hinges - 2 lower hinges - 2 receiving stop - 1 middle stop - 1 cylinder lock - 1 handle (Colour Black) - 5 keys - Finishing caps - Screws and bolts
The central crosspieces of this double swing gate have been designed to be reinforced so that you can motorise it later if you wish. You will find promotional packs offering you a set consisting of a swing gate of your choice accompanied by the appropriate gate automation.
If your installation requires pillars, Casanoov offers promotional packages in the "Swing Gate" category These packages contain one aluminium swing gate of your choice, together with two aluminium posts to match the chosen dual swing gate.
The NEVIS model is also available in other sizes. Also available as a pedestrian or sliding gate
Driveway Gate delivered in kit form Clear instructions, quick and easy assembly You will find all the necessary information about this product in the technical data
The EIFEL posts in thermo-lacquered aluminum have been specially designed for the installation of a swinging or sliding gate or even a gate.
Practical, the finishing cap of our EIFEL posts can be easily installed and removed to allow you to pass electrical wires in the event of motorization of your gate, gate or for the installation of motorization accessories (flash light, photocells, ...)
This EIFEL 15x15cm post with a height of 190cm is suitable for all aluminum gates and gates not exceeding 180cm in height.
Colours: Anthracite gray (RAL 7016) Material: Aluminum Post height: 1.90 m Post section: 15 x 15 cm Section of the patina: 20 x 20 cm Installation method: To screw or seal Maximum height of the gate to be installed: 180cm
Accessories included: - Plastic finishing cap with fixing screws (Anthracite grey) - Expansion bolts (for floor fixing)
Advice :
Weight of the gate less than 80kg: You can fix your post by screwing the post fixing plate to the ground (bolts included in our kits) *
Weight of the gate greater than 80 kg: It is recommended to concrete and steel the EIFEL post in order to consolidate it (see technical diagram).
* In the case of hollow posts, we advise you to fix the plate using 10x120mm anchoring studs, for a stronger and more secure fixing. In the case of concrete posts, you can completely fix your post using the bolts included in our kits
Compatible with all CASANOOV gates and gates of height 160 and 180 cm The EIFEL 15x15cm post is available in a height of 166cm and in a matt white color Also available in section: 10x10cm; 20x20cm
If your installation requires several posts, you will find in the "Gate Accessories" category promotional offers in the form of a set of 2 or 4 EIFEL posts of your choice.
Clear instructions, simple and quick assembly. Find all the necessary information about this product in the technical characteristics.
Technical drawings
Swing gate 3m NEVIS H.160cm grey aluminium
Swing gate 3m NEVIS H.160cm grey aluminium
Aluminium Post 15x15 EIFEL H.190cm - Anthracite Grey
Assembly instructions - KIT-000222
