The SANTIS Pedestrian Gate with its simple and classic design is the perfect compromise between openwork and fully boarded pedestrian gate. This vertical …
The SANTIS Pedestrian Gate with its simple and classic design is the perfect compromise between openwork and fully boarded pedestrian gate. This vertical mixed infill model will allow you to reconcile luminosity and privacy by means of a barred opening in the upper part and a shading in the lower part.
Description : Garden gate with mixed infill, Vertical Board with Straight Top & Vertical Open Pales Material : Aluminium Colour : Anthracite grey (RAL 7016) Dimensions : Width 100cm x Height 140cm Required width between pillars: 103cm Minimum height of pillars : 160cm Inspired and designed in France
This Garden Gate with mixed infill kit, to be assembled and installed by yourself, contains : - 5 aluminium bars (Width 7.8cm) - 7 powder-coated aluminium slats (Width 15.5cm) - 1 upper hinge - 1 lower hinge - 1 receiving stop - 1 cylinder lock - 1 handle (Colour Black) - 5 clefs - Finishing caps - Screws and bolts
If your installation requires pillars, Casanoov offers promotional packages in the "Side Gate" category These packages contain one aluminium side gate of your choice, together with two aluminium posts to match the chosen pedestrian gate
The SANTIS model is also available in other sizes. Also available as a double swing or sliding gate
Garden Gate delivered in kit form Clear instructions, quick and easy assembly You will find all the necessary information about this product in the technical data
The EIFEL posts in thermo-lacquered aluminum have been specially designed for the installation of a swinging or sliding gate or even a gate.
Practical, the finishing cap of our EIFEL posts can be easily installed and removed to allow you to pass electrical wires in the event of motorization of your gate, gate or for the installation of motorization accessories (flash light, photocells, ...)
This EIFEL 15x15cm post with a height of 166cm is suitable for all aluminum gates and gates not exceeding 140cm in height.
Colours: Anthracite gray (RAL 7016) Material: Aluminum Post height: 1.66 m Post section: 15 x 15 cm Section of the patina: 20 x 20 cm Installation method: To screw or seal Maximum height of the gate to be installed: 140cm
Accessories included: - Plastic finishing cap with fixing screws (Anthracite grey) - Expansion bolts (for floor fixing)
Advice :
Weight of the gate less than 80kg: You can fix your post by screwing the post fixing plate to the ground (bolts included in our kits) *
Weight of the gate greater than 80 kg: It is recommended to concrete and steel the EIFEL post in order to consolidate it (see technical diagram).
* In the case of hollow posts, we advise you to fix the plate using 10x120mm anchoring studs, for a stronger and more secure fixing. In the case of concrete posts, you can completely fix your post using the bolts included in our kits
Compatible with all CASANOOV gates and gates 140 cm high The EIFEL 15x15cm post is available in a height of 190cm and in a matt white color Also available in section: 10x10cm; 20x20cm
If your installation requires several posts, you will find in the "Gate Accessories" category promotional offers in the form of a set of 2 or 4 EIFEL posts of your choice.
Clear instructions, simple and quick assembly. Find all the necessary information about this product in the technical characteristics.
Technical drawings
Side gate 1m SANTIS H.140cm grey aluminium
Side gate 1m SANTIS H.140cm grey aluminium
Aluminium Post 15x15 EIFEL H.166cm - Anthracite Grey
Assembly instructions - STW-000049
