Ideal for closing your property while leaving a passage for pedestrians, discover our CIMONE aluminum sliding gate, the perfect compromise to secure your …
Ideal for closing your property while leaving a passage for pedestrians, discover our CIMONE aluminum sliding gate, the perfect compromise to secure your home without weighing down the appearance of your exterior.
Its full aluminum design makes this sliding gate an ideal model to protect your property from prying eyes and thus benefit from the greatest privacy. However, its few openwork horizontal spaces allow you not to be completely cut off from the outside and thus to be able to keep a little light and visibility to the outside.
The 3m CIMONE sliding gate offers an ideal solution, combining security, durability and originality for the entrance to your property. Its exclusive design combines elegance and modernity.
Designed in aluminum, a material known for its many advantages, the CIMONE sliding gate is a sustainable choice because it combines lightness, longevity and minimal maintenance. Indeed, aluminum is a material renowned for its anti-corrosion capabilities, its resistance to rust and shocks as well as its ease of maintenance and robustness. Thanks to its powder-coated finish, you are further assured of its long-term longevity
The installation of the CIMONE gate is disconcertingly easy thanks to its ingenious design and its intuitive assembly manual, including all the necessary accessories.
Adopt the CIMONE aluminum sliding gate and bring a touch of originality to your property with subtlety!
Description: Semi-openwork sliding gate design Material: Aluminum Color: Anthracite gray (RAL 7016) Dimensions: Width 391 cm x Height 147 cm Total width required with clearance: 782 cm Minimum height of pillars: 160cm
Save now by exploring the packs associated with this item! All promotional packs associated with this gate are available in the "Promotional pack" tab of this product sheet.
Need posts? If your installation requires posts, we offer promotional packs including the aluminum gate of your choice accompanied by two aluminum posts adapted to the chosen garden door.
The CIMONE gate is also available in a height of 1m60. Are you attracted by the CIMONE range? Don't miss out on discovering the matching sliding gates and gates to create a harmonious exterior.
Garden gate delivered in kit form. Clear instructions, quick and easy assembly. Find all the necessary information for this product in the technical characteristics.
The TANKER C600 sliding gate motor is designed for users wishing to motorize their sliding gate to automate its opening and closing. It allows you to transform your gate into an electric sliding gate. This rack-and-pinion motor is suitable for all types of sliding gates that can be motorized. Whether for PVC, wood, aluminum, or iron sliding gates, this automatic system can be installed on all models weighing less than 600 kg.
Here are the main technical specifications of the motor:
Motor voltage: 230V – 370W Input power: 220VAC±10%/110VAC±10% Frequency: 50Hz/60Hz Gear module: M4 Z=16 teeth Output torque: 30.0 Nm Nominal rotation speed: 14,000 rpm Maximum gate weight: 600kg on level ground Magnetic start and end stops Environmental temperature: -25°C ~ +55°C Protection class: IP55 Opening speed: approximately 12 meters per minute Maximum force: 1100N Nylon rack Control card included with the motor.
Accessories included:
- Two 4-button remote controls with protective cover. Batteries are included. - Nylon rack (4m – 12 pieces of 33cm) - Installation and setup manual - 2 quick release keys in case of power outage 1 pair of infrared photocells with the following characteristics: - 'Transmitter' photocell - 'Receiver' photocell - Black ABS material - Infrared with anti-glare 50,000LUX 1 flashing LED light with a power of 3W (equivalent to a power of 30W for an old-generation incandescent bulb) with the following characteristics: - Operating voltage: 12-265 VAC/DC - Load capacity: < 3W - Flashing frequency: 1Hz - Operating temperature: -20°C ~ +60°C - IP rating: IP54
Tanker C600 motorization features : - Opening according to your choice: left to right (factory mode) or right to left. - Automatic closing: After opening, the gate will automatically close after 0, 10, 30, or 60 seconds, depending on your choice. - Pedestrian mode: The gate opens only partially and then closes after 0, 5, 10, or 30 seconds. - Condominium mode: This mode allows you to reduce settings and configure up to 50 remote controls. Each remote control will control: button 1 (gate opening), button 2 (gate stopping), button 3 (gate closing), and button 4 (pedestrian mode). Each remote control will operate in the same way. - Adjustable opening and closing sensitivity: Depending on your environment, you can adjust the opening and closing power. - Manual gate unlocking. With the included key, you can disengage the opening of your gate and operate it manually. - Auto-stop. The gate stops if it encounters an obstacle. - The motor cannot be connected to a backup battery. In the event of a power outage, manual unlocking with two keys (included) is possible. This disengages the motor's output pinion and allows you to operate your gate freely.
You can pair this motor with photocells, a flashing light, and an opening push button. Be sure to check the electrical compatibility (voltage in Volts) of your existing accessories if they are not from our website. All our accessories are compatible with all our motors.
Installation Tips:
To successfully connect and configure your motor, proceed step by step and check that it is working properly between each step. If you pair accessories with your C600 motor, check each time that your motor is in working order. Finally, ensure that your electrical connection is properly wired. This will help you operate your installation and prevent electrical leaks. Our Casanoov technical team is here to assist you if needed.
Assembly instructions - KIT-000517
